Bobcat 331 Hydraulic Final Drive Motor

Ab - Cage-Cone Frontface Clearance:8.4 mm; Aa - Cage-Cone Backface Clearance:8.6 mm; e - ISO Factor8:0.37; C90 - Dynamic Radial Rating (90 million revolutions)4:152000 lbf; C - Cup Width:69.850 mm; B - Cone Width:93.663 mm; D:787.400 mm; Cup Part Number:649310; Ca90 - Dynamic Thrust Rating (90 milli

Z:64.5 mm; L1:39 mm; T min.:-40 °C; G:R1/8"; A1:21 mm; H2:70 mm; Designation of housing:PE205N-; C:14 kN; d1:37.4 mm; L:130 mm;

Dimension SA:3.39 in; Shaft Tolerance:0.0015 in; Dimension L Exp:3.59 in; Dimension L Fix:3.51 in; Shaft Size  :2-7/16 in; Bearing Number:22213; Dimension BC:7.6 in; Grease Lubrication - T Seal:2800 rpm; Oil Lubrication - M/N Seal:1800 rpm; Pre Install Clearance Min:0.0016 in;

Characteristic inner ring frequency, BPFI:10.77 Hz; Manufacturer Name:NTN; Long Description:Cone; Standard Preci; d1:94 mm; UNSPSC:31171527; Component:Cone; d:60.32 mm; Nlim (grease):3,100 rpm; Basic Number:5583; Fatigue limit load, Cu:34.5 kN;

Dimension T:21.5 in; Support Type:Take-Up; Ca - Axial Load Rating:6609.30 lbf; Series Type:Light Series; Dimension P:1.0 in; Dimension V:8.0 in; Cr - Dynamic Load Rating:103187 lbf; Bearing Number:LSE511BR; Dimension W:2.0 in; Bearing - Housing - Seal:LSE511BRH;

A:40 mm; Weight:3.23 kg; Designation of bearing:EX308-24G2T04; J:112 mm; Designation of housing:FS308-; d:38.1 mm; N:19mm; A4:30 mm; C:40.56 kN; B:41.3 mm;

Bearing UPC:013992058935; Bearing Type:Split Cylindrical Ex; Dimension H2:10.7 in; Dimension L:16.5 in; Bearing Number:LSE311BX; Weight:74 lb; Bolt Size:2 x M24; Dimension H1:2.0 in; Seal Type:Kevlar Packing Seal; Housing Width:5.2 in;

Dimension H1:2.4 in; Series Type:Heavy Series; Housing Width:9.6 in; Dimension J:24.7 in; Dimension K:5.5 in; Bearing Number:HSM170BX; Cr - Dynamic Load Rating:268871 lbf; Bearing UPC:013992023940; Support Type:Four-Bolt Plummer Bl; Dimension M:9.0 in;

d:30.16 mm; G:M6x1; B1:43 mm; H3:90; s1:22.5 mm; C:25.7 kN; B:27 mm; Designation of housing:FC207-; e:11 mm; d1:52 mm;

S:9.5 mm; L1:56 mm; C:25.7 kN; s1:30.2 mm; Recommended tightening torque for set screw:11.5 Nm; Designation of bearing:ES207G2T20; A1:30 mm; C0:15.2 kN; L:167 mm; H2:140 mm;

r:2; SW:3.97 mm; C1:7.2 mm; Recommended tightening torque for set screw:8 Nm; G:5/16-24UNF; m:8 mm; S:19 mm; d:36.51 mm; B:48 mm; D:80 mm;

Ca90 - Dynamic Thrust Rating (90 million revolutions)6:43600 lbf; R - Cone Frontface To Clear Radius2:0.250 in; Cg - Geometry Factor8:0.178; B - Double Cone Width:5.9375 in; Design Units:Imperial; Series:HM256800; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:508000 lbf; K - Factor7:1

Static load, C0:32 kN; row type & fill slot:Single Row Non-Fill; EAN:4547359392548; outside diameter:100 mm; d:45 mm; operating temperature range:-40 to 120 ºC; Outside Diameter:3.937 Inch | 100 Mil; fillet radius:1.5 mm; static load capacity:32000 N; Da max:92 mm;

Dz:132 mm; Designation of open end cover:SCOE213-65; B1:85.7 mm; H1:27.5 mm; J:203 mm; S:34.1 mm; C:57.2 kN; H2:156 mm; Designation of closed end cover:SCCE213; A:65 mm;

T max.:100 °C; G:M8x1; Recommended tightening torque for set screw:11.5 Nm; C:25 mm; D:80 mm; SW:4 mm; S:19 mm; r:2; B:48 mm; Weight:0.71 kg;