Nabtesco GM05VL-B-18/27-2 Hydraulic Final Drive Motor

Seal:Silicone; Accessory:No Cover; Bearing Unit, Type:Pillow Type; Stroke:No; Pillow Type, Category:Centre Height; Diameter series symbol:Used for Light load; Stroke:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Fit:J7; Surface Treatment:No;

b:13.2 mm; Nref:2,800 rpm; Y2:4; d2:151.4 mm; e:0.25; rs min:3 mm; Min operating temperature, Tmin:-40 °C; Radial clearance class:C3; Y1:2.69; B:64 mm;

da min:35 mm; Characteristic rolling element frequency, BSF:4.68 Hz; Min operating temperature, Tmin:-25 °C; Radial clearance class:C3; Da max:57 mm; Mass:0.2 kg; Nlim (grease):11,000 rpm; ra max:1 mm; f0:13.8; Brand:NTN;

T max.:100 °C; B:51.6 mm; C0:23.2 kN; Designation of open end cover:SCOU210-30; Designation of bearing:UC210-30G2T04; L:115 mm; G:M6x1; S:19 mm; Recommended tightening torque for set screw:16.8 Nm; e:22 mm;

Flange Shape:Square Type; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Shape:Flanged Pilot Type; Bearing I.D. d(mm):20; Shape:Flanged Pilot Type; Number of Bearings:Double; Bearing Part Number:6004; Type:Bearings with Housin;

Static load, C0:24.8 kN; r1s min:0.6 mm; Min operating temperature, Tmin:-40 °C; Mass:0.5 kg; Characteristic outer ring frequency, BPF0:5.6 Hz; Characteristic rolling element frequency, BSF:5.4 Hz; d:50 mm; Contact angle α:40 °; Characteristic inner ring frequency, BPFI:7.4 Hz; Max operating tempera

A:29.5 mm; N:11,5mm; G:R1/8"; A2:35 mm; C:9.55 kN; A1:10 mm; Dz:46 mm; e:19 mm; J:63.5 mm; L:86 mm;

Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Holder Width(inch):71 ～ 140; Shape:Flanged Pilot Type; Type:Bearings with Housin; Shape:Flanged Pilot Type; Days to Ship:8 Days or more; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel

Designation of housing:FA209N-; L1:90 mm; Weight:1.97 kg; C0:20.8 kN; Designation of closed end cover:SCC209; B:49.2 mm; H:181 mm; s1:24.6 mm; Recommended tightening torque for set screw:11.5 Nm; L:108 mm;

Unit Body Material:Cast Iron; Stroke:No; Diameter series symbol:Used for Light load; Accessory:With cast iron cover; Unit Body Material:Cast Iron; Days to Ship:Quote; Basic Load Rating, Dynamic Rating(N):34100; Fit:J7; Basic Load Rating, Static Rating(N):21300; RoHS:6;

Accessory:No Cover; Fit:J7; Fit:J7; Unit, Type:Insert Bearing Unit; Unit Body Material:Cast Iron; Surface Treatment:No; Diameter series symbol:Used for Light load; Basic Load Rating, Dynamic Rating(N):9550; Grease Type:Standard Grease; Unit Body Material:Cast Iron;

Number of Bearings:Double; Width T(mm):30; Volume Discount:Available; Bearing Retained:No; Flange O.D. H(φ):35; Seals:ZZ (Double Shield); Bearing Material:Stainless Steel; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:624; Bearing Material:Stainless Steel;

d:110.000 mm; Sealed Speed Rating n3:1600 rpm; Accessories:One Seal; Grease Speed Rating n1:1600 rpm; B:69.80 mm; Basic Dynamic Radial Load Rating C:203000 N; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:200000 N; D:200.0000 mm; Oil Speed Rating n2:2600 rpm;